HEAT PRESS INSTRUCTIONS FOR DTF TRANSFER FILMS

    How to Apply Cold/Warm Peel Film ?

    1. Set heat press temperature and timer. (See details below)
    2. Set pressure to medium (60LB of pressure)
    3. Place your garment onto the heat press.
    4. Place your DTF film onto desired place on your garment. (If you want to protect the film and garment from overheating, you can place Teflon or parchment paper over the film.)
    5. Press it 8-12 seconds.
    6. Remove the garment from heat press and let it cool at least 30 seconds before peel the film.
    7. Peel the film carefully.
    8. Post-press for an additional 3-5 seconds to remove any additional adhesive and to make the print last longer.

    How to Apply Hot Peel Film?

    1. Set heat press temperature and timer. (See details below)
    2. Set pressure to medium (60LB of pressure)
    3. Place your garment onto the heat press.
    4. Place your DTF film onto desired place on your garment. (If you want to protect the film and garment from overheating, you can place Teflon or parchment paper over the film.)
    5. Press it 3-8 seconds.
    6. You can peel off the film carefully right after you press it.
    7. Post-press for an additional 3-5 seconds to remove any additional adhesive and to make the print last longer.

    Temperatures by Material Types

    TEMPERATURE
    100% Cotton: 325F
    Polyester: 275F
    Tri-Blends: 275F
    50/50 Blends: 300F
    Leather: 300F
    Denim: 320F
    Canvas: 320F
    Vinyl: 285F

    MATERIAL TYPES
    Cottons
    Combined-Cottons
    Tri-Blends
    50/50 Blends
    Polyesters
    Blended Fabrics
    Leather
    Vinyl
    Denim
    Canvas
    and more…

    Ready To Press DTF Transfers